The Gen 2 Series of brakes started where the Gen 1 left off. We came up with a solution for the shooter that has been a game changer. The Gen 2 has a nut that is a separate piece. This allows our customers to install the brake themselves at home. Installations takes about 30 seconds and has no hideous crush washers or peel washers to deal with. Additionally competitive shooters can easily remove this brake for cleaning or simply to move if from barrel to barrel. Competitors can burn through 6 barrels or more in a season at times. This means less money spent on gear and with your smith. To the gunsmith it means no hassle indexing a brake. Simply thread to spec. and go.
This brake is meant for Larger barrels that are generally required by the 338 Lapua etc.
We recommend a barrel diameter of .850-1.0 inches for this brake. The diameter is 1.115″ and cannot be turned down. Overall length is 3.3″.
Additional thread sizes available: 3/4×24, 18×1, 18×1.5
Additional finishes available: Nitrided
Contact Us for special orders.
5/8 x 24
30, 338, 6.5mm